Aluminum alloy welding requires extremely high arc stability. The OTC DAIHEN P500L welding machine excels in the MIG short-circuit welding mode thanks to its optimized aluminum welding control technology. Below are the recommended process parameters for square butt joints and horizontal fillet welds, provided for the reference of on-site technicians.
1. Square Butt Joint Welding Parameters
| Plate Thickness t (mm) | Wire Diameter (mm) | Current (A) | Voltage (V) | Speed (cm/min) | Wire Stick-out (mm) | Gas Flow (L/min) |
|---|---|---|---|---|---|---|
| 3.0 | 1.2 | 120-140 | 20-22 | 60-80 | 15 | 20 |
| 4.0 | 1.2 | 150-170 | 22-24 | 60-80 | 15-18 | 20 |
| 6.0 | 1.6 | 180-210 | 23-25 | 40-60 | 17-20 | 20-25 |
2. Horizontal Fillet Welding Parameters
| Plate Thickness t (mm) | Wire Diameter (mm) | Current (A) | Voltage (V) | Speed (cm/min) | Wire Stick-out (mm) | Gas Flow (L/min) |
|---|---|---|---|---|---|---|
| 3.0 | 1.2 | 140-160 | 21-22 | 60-70 | 15 | 15-20 |
| 4.0 | 1.2 | 150-170 | 22-24 | 50-60 | 15-18 | 15-20 |
| 6.0 | 1.6 | 200-230 | 24-26 | 50-65 | 17-20 | 20-25 |
* Note: The above parameters are for reference only. In actual production, please fine-tune them based on the base metal condition, ambient temperature, and welding wire characteristics.